Print View: ELEC7901 - Sem 1 2008 - St Lucia

5. Assessment

5.1 Assessment Summary

This is a summary of the assessment in the course. For detailed information on each assessment, see 5.5 Assessment Detail below.

Assessment Task	Due Date	Weighting	Learning Objectives
Presentation Cardiac Instrumentation	19 Mar 08 09:00 - 19 Mar 08 10:50	15%	2, 3
Laboratory Report Orthopaedics Instrumentation	9 Apr 08 14:00 - 2 May 08 17:00	15%	1, 2, 3, 4, 5
In Class Quiz Mid-semester test	23 Apr 08 14:00 - 23 Apr 08 15:00	15%	1, 2, 4
Presentation Respiratory Instrumentation	24 Apr 08 09:00 - 24 Apr 08 10:50	15%	2, 3
Exam - during Exam Period (School) Final closed book examination	Examination Period	40%	1, 2, 3, 4, 5

5.2 Course Grading

Grade 1, Fail: Fails to demonstrate most or all of the basic requirements of the course:

A Grade of 1 will be awarded for an overall mark below 20%.

Grade 2, Fail: Demonstrates clear deficiencies in understanding and applying fundamental concepts; communicates information or ideas in ways that are frequently incomplete or confusing and give little attention to the conventions of the discipline:

A Grade of 2 will be awarded for an overall mark below 45% but greater than or equal to 20%.

Grade 3, Fail: Demonstrates superficial or partial or faulty understanding of the fundamental concepts of the field of study and limited ability to apply these concepts; presents undeveloped or inappropriate or unsupported arguments; communicates information or ideas with lack of clarity and inconsistent adherence to the conventions of the discipline:

A Grade of 3 will be awarded for an overall mark below 50% but greater than or equal to 45%.

Grade 4, Pass: Demonstrates adequate understanding and application of the fundamental concepts of the field of study; develops routine arguments or decisions and provides acceptable justification; communicates information and ideas adequately in terms of the conventions of the discipline:

A Grade of 4 will be awarded for an overall mark below 65% but greater than or equal to 50%.

Grade 5, Credit: Demonstrates substantial understanding of fundamental concepts of the field of study and ability to apply these concepts in a variety of contexts; develops or adapts convincing arguments and provides coherent justification; communicates information and ideas clearly and fluently in terms of the conventions of the discipline:

A Grade of 5 will be awarded for an overall mark below 75% but greater than or equal to 65%.

Grade 6, Distinction: As for 5, with frequent evidence of originality in defining and analysing issues or problems and in creating solutions; uses a level, style and means of communication appropriate to the discipline and the audience:

A Grade of 6 will be awarded for an overall mark below 85% but greater than or equal to 75%.

Grade 7, High Distinction: As for 6, with consistent evidence of substantial originality and insight in identifying, generating and communicating competing arguments, perspectives or problem solving approaches; critically evaluates problems, their solutions and implications:

A Grade of 7 will be awarded for an overall mark of 85% or greater.

5.3 Late Submission

No extensions will be granted except in exceptional personal circumstances (documented medical reason or family emergency). Personal hardware or computer failures are not grounds for extension.

5.5 Assessment Detail

Cardiac Instrumentation

Type: Presentation
Learning Objectives Assessed: 2, 3
Due Date:
19 Mar 08 09:00 - 19 Mar 08 10:50
Weight: 15%
Task Description: Each laboratory group (2-3 students) will be required to deliver a 20-30 minute presentation on their experimental findings. Topics will suggest layout of each assignment. You will be expected to reference current literature and demonstrate the ability to critically appraise current techniques and pose appropriate engineering solutions. Fluency and clarity will be highly regarded.
Criteria & Marking:

Marks will be assigned as follows:
Content (50%): Including: Introduction and background theory, aims, methodology, results, conclusions (group mark);
Structure (10%): Logical flow of the ideas presented in seminar and between the individual presenters (group mark);
Verbal Skills (10%): Presenters should be confident, relaxed, natural, well rehearsed, maintain eye contact and speak clearly (individual mark);
Visual Aids (10%): Appropriate use of visual aids and diagrams to support the presentation. Visual aids need to be clear and uncluttered, with an appropriate level of detail and overall number of slides (individual mark);
Timing (10%): both overall timing and timing of individual speakers is appropriate (individual mark);
Questions (10%): Questions are answered convincingly and honestly, i.e., answering “I don’t know” is better than pretending you do (individual mark).

Orthopaedics Instrumentation

Type: Laboratory Report
Learning Objectives Assessed: 1, 2, 3, 4, 5
Due Date:
9 Apr 08 14:00 - 2 May 08 17:00
Weight: 15%
Task Description: Expected length is 5000 - 8000 words. Topics will suggest layout of each assignment. You will be expected to reference current literature and provide a full and accurate bibliography.
Criteria & Marking: The ability to critically appraise current techniques and pose appropriate engineering solutions will be assessed. Fluency and clarity will be highly regarded.
Submission: Submit to ELEC7901 submission box on level 1 of GP south (building 78).

Mid-semester test

Type: In Class Quiz
Learning Objectives Assessed: 1, 2, 4
Due Date:
23 Apr 08 14:00 - 23 Apr 08 15:00
Weight: 15%
Perusal: 10 minutes
Duration: 40 minutes
Format: Short answer
Task Description: This will be a closed book examination to test the student's knowledge and understanding of the material presented in lectures and practicals during weeks 1-6.
Criteria & Marking: There will be 15-20 multiple-choice and/or short-answer/calculations questions. All questions will have equal value.

Respiratory Instrumentation

Type: Presentation
Learning Objectives Assessed: 2, 3
Due Date:
24 Apr 08 09:00 - 24 Apr 08 10:50
Weight: 15%
Task Description: Each laboratory group (2-3 students) will be required to deliver a 20-30 minute presentation on their experimental findings. Topics will suggest layout of each assignment. You will be expected to reference current literature and demonstrate the ability to critically appraise current techniques and pose appropriate engineering solutions. Fluency and clarity will be highly regarded.
Criteria & Marking:

Final closed book examination

Type: Exam - during Exam Period (School)
Learning Objectives Assessed: 1, 2, 3, 4, 5
Due Date:
Examination Period
Weight: 40%
Perusal: 10 minutes
Duration: 120 minutes
Format: Short answer, Short essay, Problem solving
Task Description: A two hour final examination will be held during the final examination period. This exam will be closed-book and will contain both short-answer/calculation questions. You will be required to answer all the questions in the paper. You may also bring a battery-operated non-programmable calculator. Programmable calculators and other computing or communication devices are NOT permitted. The examination will test the understanding of the various measurement and design techniques discussed and the relevance to a clinical or research environment. Assessment variation is possible for students with a disability (see HUPP 3.30.3 Special Arrangements for Examinations for Students with a Disability).
Criteria & Marking: You are expected to be familiar with all aspects of the course activities including all modules and laboratories. Subject matter taught/discussed directly in the classroom as well as knowledge gained through other activities such as tasks (activities) assigned in the course guides, hands-on project work (instrumentation+computer labs), and reading materials provided (or directed to) by the lectures will also be considered as examinable content.

6. Policies & Guidelines

This section contains the details of and links to the most relevant policies and course guidelines. For further details on University Policies please visit myAdvisor and the University Handbook of Policies and Procedures.

6.1 Assessment Related Policies and Guidelines

University Policies & Guidelines

An overview of the University’s assessment-related policies can be found on myAdvisor (http://www.uq.edu.au/myadvisor/index.html?page=2910).

Academic Integrity
It is the University's task to encourage ethical scholarship and to inform students and staff about the institutional standards of academic behaviour expected of them in learning, teaching and research. Students have a responsibility to maintain the highest standards of academic integrity in their work. Students must not cheat in examinations or other forms of assessment and must ensure they do not plagiarise.

Plagiarism
The University has adopted the following definition of plagiarism:

Plagiarism is the act of misrepresenting as one's own original work the ideas, interpretations, words or creative works of another. These include published and unpublished documents, designs, music, sounds, images, photographs, computer codes and ideas gained through working in a group. These ideas, interpretations, words or works may be found in print and/or electronic media.

Students are encouraged to read the UQ Academic Integrity and Plagiarism policy (http://www.uq.edu.au/hupp/index.html?page=25128) which makes a comprehensive statement about the University's approach to plagiarism, including the approved use of plagiarism detection software, the consequences of plagiarism and the principles associated with preventing plagiarism.

Feedback on Assessment
Feedback is essential to effective learning and students can expect to receive appropriate and timely feedback on all assessment. For a detailed explanation of the feedback you are entitled to, you should consult the policy on Student Access to Feedback on Assessment. (http://www.uq.edu.au/hupp/index.html?page=25114&pid=25075)

As a student you have a responsibility to incorporate feedback into your learning; make use of the assessment criteria that you are given; be aware of the rules, policies and other documents related to assessment; and provide teachers with feedback on their assessment practices.

There are certain steps you can take if you feel your result does not reflect your performance. Please refer to the myAdvisor web site. (http://www.uq.edu.au/myadvisor/index.html?page=2953&pid=2910)

School of Information Technology and Electrical Engineering Assessment Guidelines

Misconduct

Further to the statement on academic integrity and plagiarism above, students are required to read and understand the ITEE policy on Student Misconduct (http://www.itee.uq.edu.au/about_ITEE/policies/student-misconduct.html).

Late Arrival or Non-attendance at Examinations

The policy and procedure for late arrival or non-attendance at centrally controlled examinations is set out in the University's Examinations policy (HUPP 3.30.5), sections 8 and 10.2.

The way in which late arrival at a School-controlled examination is dealt with will be at the discretion of the course coordinator, who may be guided by the policy for centrally controlled exams.

In the case that a student requests a special exam for a School-controlled exam, the request will be considered and, if allowed, the timing shall be determined by the course coordinator, in consultation with the School's Chief Examiner where necessary, and in accordance with HUPP 3.30.5. Unless otherwise indicated in the Course Profile, applications must be made in writing to the Head of School no later than one week after the exam. Late applications will not be accepted.

Examination Feedback

In addition to the advice above, students wishing to view examination answer scripts and/or question papers should consult with the School office (Room 217, General Purpose South Building [78], St Lucia; Room 218, Building 1, Ipswich) regarding arrangements. The ITEE policy on exam script viewing is available at http://study.itee.uq.edu.au/current_students/exam_script_viewing.html.

Supplementary Assessment

If you fail this course you may be eligible for supplementary assessment - see the general award rules and/or your program rules for details. You should note that even though you may be eligible for supplementary assessment under these rules, in some circumstances there may be no practical assessment that can be offered to allow you to meet the minimum passing requirements. These circumstances may include failure based on:

group or team based assessment;
attendance or class participation requirements;
laboratory-based assessment, where laboratories can't practically be made available after classes have finished;
project or thesis-based assessment, where a significant period of time would be required to undertake supplementary assessment;
progressive assessment, where subsequent assessment items build on earlier assessment items; or
multiple assessment items, where it is impractical to offer multiple supplementary assessment items.

If the course coordinator determines that there is no practical supplementary assessment that can be offered to allow you to improve your grade, then you will not be offered supplementary assessment and your grade will remain unchanged.

6.2 Other Policies and Guidelines

University Policies and Guidelines

Placement Courses
Students on a placement course – also known as a work placement, internship, industry study, industry experience, clinical practice, clinical placement, practical work, practicum, fieldwork, teaching practice – should refer to the University policy, Placement Courses (http://www.uq.edu.au/hupp/index.html?page=25120&pid=25075) for detailed information.

Working with Children
Students whose studies include a professional/work placement, internship, clinical practice, teaching practice or other similar activity which involves them in regular contact with children should refer to the University policy, Working with Children Check - "blue card" (http://www.uq.edu.au/hupp/index.html?page=25004&pid=24963) to find out how to apply for a ‘blue card’.

Students with a Disability
Any student with a disability who may require alternative academic arrangements, including assessment, in the course/program is encouraged to seek advice at the commencement of the semester from a Disability Adviser at Student Support Services. Refer to the University policy, Students with a Disability (Disability Action Plan) (http://www.uq.edu.au/hupp/index.html?page=25122&pid=25075) and to the policy on Special Arrangements for Examinations for Students with a Disability (http://www.uq.edu.au/hupp/index.html?page=25111&pid=25075

Where an adjustment is made to an accredited program, it is the responsibility of the relevant Faculty to liaise with professional and registration bodies regarding the acceptability of the change/s.

Occupational Health and Safety
Undergraduate Students (http://www.uq.edu.au/hupp/index.html?page=25055&pid=25015) and Postgraduate Students (http://www.uq.edu.au/hupp/index.html?page=25057&pid=25015) should be familiar with the University policies on occupational health and safety in the laboratory.

Other School of Information Technology and Electrical Engineering Guidelines

Ethical Clearance

If your course involves assignment or project work involving human subjects or human-related materials, you must investigate the need for ethical clearance and obtain it when required. Information on ethical clearance can be found at http://www.uq.edu.au/research/orps/index.html?page=5064&pid=5256.

Learning Summary

Below is a table showing the relationship between the learning objectives for this course and the broader graduate attributes developed, the learning activities used to develop each objective and the assessment task used to assess each objective.

Learning Objectives

After successfully completing this course you should be able to:

1  Understand the complex relationship of biological systems to devices which seek to measure various performance parameters.
2  Write and deliver assignment work for assessment.
3  Demonstrate a high standard of creativity and inventiveness to solve design issues in the field of medical electronics.
4  Appraise designs from a functional, biological and safety viewpoint.
5  Appreciate the constructive role of the engineer in attainment of a healthy society.

Assessment & Learning Activities

	Learning Objectives
	1	2	3	4	5
Learning Activities
Cardiac Instrumentation (Lecture Series)
Cardiac Instrumentation (Laboratory )
Respiratory Instrumentation (Lecture Series)
Respiratory Instrumentation (Laboratory )
Deep Brain Stimulation (DBS) (Lecture Series)
Orthopaedics Instrumentation (Lecture Series)
Polysomnography (PSG) (Lecture Series)
Biomedical Safety and Standards (Lecture Series)
Medical Instrumentation Safety (Lecture Series)
Course review and revision (Lecture)
Assessment Tasks
Cardiac Instrumentation
Orthopaedics Instrumentation
Mid-semester test
Respiratory Instrumentation
Final closed book examination

Graduate Attributes

Successfully completing this course will contribute to the recognition of your attainment of the following UQ (Postgrad Coursework) graduate attributes:

	Learning Objectives
	1	2	3	4	5
Graduate Attributes
*A IN-DEPTH KNOWLEDGE OF THE FIELD OF STUDY*
A2. A broad understanding of the field of study, including how other disciplines relate to the field of study.
A3. A comprehensive and in-depth knowledge in the field of study.
A5. An international perspective on the field of study.
A7. An appreciation of the link between theory and practice.
*B EFFECTIVE COMMUNICATION*
B1. The ability to collect, analyse and organise information and ideas and to convey those ideas clearly and fluently, in both written and spoken forms.
B2. The ability to interact effectively with others in order to work towards a common outcome.
B3. The ability to select and use the appropriate level, style and means of communication.
B4. The ability to engage effectively and appropriately with information and communication technologies.
B5. The ability to practise as part of an interdisciplinary team.
*C INDEPENDENCE AND CREATIVITY*
C2. The ability to work and learn independently and effectively.
C3. The ability to generate ideas and adapt innovatively to changing environments.
C5. The ability to formulate and investigate problems, create solutions, innovate and improve current practices.
C6. The abilities and skills that provide a foundation for future leadership roles.
*D CRITICAL JUDGEMENT*
D2. The ability to apply critical reasoning to issues through independent thought and informed judgement.
D4. The ability to process material and to critically analyse and integrate information from a wide range of sources.
D5. The ability to evaluate opinions, make decisions and to reflect critically on the justifications for decisions using an evidence-based approach.
*E ETHICAL AND SOCIAL UNDERSTANDING*
E1. An understanding of social and civic responsibility.
E3. An appreciation of the philosophical and social contexts of a discipline.
E4. A knowledge and respect of ethics and ethical standards in relation to a major area of study.
E5. A knowledge of other cultures and times and an appreciation of cultural diversity.
E7. The ability to work effectively and sensitively across all areas of society.
E8. An understanding of and respect for the roles and expertise of associated disciplines.

feedback

Richard Aston, Principles of biomedical instrumentation and measurement, Columbus : Merrill Pub. Co., 1990.

John G. Webster, Bioinstrumentation, Hoboken, N.J. : John Wiley & Sons, 2004.

MATLAB STUDENT VERSION 14 WITH SERVICE PACK 3

Bioelectromagnetism, Jaakko Malmivuo and Robert Plonsey, Oxford Uni Press, 1995

ELEC7901 - Sem 1 2008 - St Lucia - Internal

1. General Course Information

1.1 Course Details

1.2 Course Introduction

1.3 Course Staff

1.4 Timetable

2. Aims, Objectives & Graduate Attributes

2.1 Course Aims

2.2 Learning Objectives

2.3. Graduate Attributes

3. Learning Resources

3.1 Required Resources

3.2 Recommended Resources

3.3 University Learning Resources

3.4 School of Information Technology and Electrical Engineering Learning Resources

4. Teaching & Learning Activities

4.1 Learning Activities

4.2 Other Teaching and Learning Activities Information