Print View: ELEC7608 - Sem 1 2008 - St Lucia

5. Assessment

5.1 Assessment Summary

This is a summary of the assessment in the course. For detailed information on each assessment, see 5.5 Assessment Detail below.

Assessment Task	Due Date	Weighting	Learning Objectives
Exam - Mid Semester During Class mid-semester exam	18 Apr 08 10:00 - 18 Apr 08 11:00	15%	1, 2, 3
Problem Solution image processing assignment	16 May 08 00:00	15%	3
assignment review of technology assignment	16 May 08 00:00	15%	1, 2
Exam - during Exam Period (Central) final exam	Examination Period	55%	1, 2, 3

5.2 Course Grading

final mark	grade
85-100	7
75-84	6
65-74	5
50-64	4
45-49	3
20-44	2
0-19	1

Grade 1, Fail: Fails to demonstrate most or all of the basic requirements of the course:

Grade 2, Fail: Demonstrates clear deficiencies in understanding and applying fundamental concepts; communicates information or ideas in ways that are frequently incomplete or confusing and give little attention to the conventions of the discipline:

Grade 3, Fail: Demonstrates superficial or partial or faulty understanding of the fundamental concepts of the field of study and limited ability to apply these concepts; presents undeveloped or inappropriate or unsupported arguments; communicates information or ideas with lack of clarity and inconsistent adherence to the conventions of the discipline:

Grade 4, Pass: Demonstrates adequate understanding and application of the fundamental concepts of the field of study; develops routine arguments or decisions and provides acceptable justification; communicates information and ideas adequately in terms of the conventions of the discipline:

Grade 5, Credit: Demonstrates substantial understanding of fundamental concepts of the field of study and ability to apply these concepts in a variety of contexts; develops or adapts convincing arguments and provides coherent justification; communicates information and ideas clearly and fluently in terms of the conventions of the discipline:

Grade 6, Distinction: As for 5, with frequent evidence of originality in defining and analysing issues or problems and in creating solutions; uses a level, style and means of communication appropriate to the discipline and the audience:

Grade 7, High Distinction: As for 6, with consistent evidence of substantial originality and insight in identifying, generating and communicating competing arguments, perspectives or problem solving approaches; critically evaluates problems, their solutions and implications:

Other Requirements & Comments : grades will be derived from the total percentage achieved in the subject by the following scheme:

final mark grade

85-100 7

75-84 6

65-74 5

50-64 4

45-49 3

20-44 2

0-19 1

5.4 Other Assessment Information

standard breakpoints will be used to determine grades from total assessment percentage.

5.5 Assessment Detail

mid-semester exam

Type: Exam - Mid Semester During Class
Learning Objectives Assessed: 1, 2, 3
Due Date:
18 Apr 08 10:00 - 18 Apr 08 11:00
Weight: 15%
Perusal: 10 minutes
Duration: 60 minutes
Task Description: mid-semester exam in week 7
Criteria & Marking: You are expected to be familiar with all aspects of the course activities including all modules and laboratories. Subject matter taught/discussed directly in the classroom as well as knowledge gained through other activities such as tasks (activities) assigned in the course guides, hands-on project work and reading materials provided (or directed to) by the lectures will also be considered as examinable content.

image processing assignment

Type: Problem Solution
Learning Objectives Assessed: 3
Due Date:
16 May 08 00:00
Weight: 15%
Task Description:

to solve an image processing problem or review methods. Assignment topic will be given in week 6.

Criteria & Marking:

emphasized weighting will be given to the following atributes:

- clarity of presentation,

- completeness and relevance of material,

- critical analysis of the material.

Submission: submit ot lecturer or in submission box on level 1 of GPS

review of technology assignment

Type: assignment
Learning Objectives Assessed: 1, 2
Due Date:
16 May 08 00:00
Weight: 15%
Task Description: The assignment is worth 15% of the subject assessment. The purpose of the assignment is for students to research in-depth a topic in Medical Imaging and present an overview of the current technological state and capability in the topic area. Recent developments in the area should be included. Library catalogues, scientific journal databases and internet sites are expected to be searched to locate appropriate overview and cutting-edge information. Take care to ascertain that the information obtained has been rigorously reviewed and is not simply of a promotional nature. This is particularly important when using information downloaded from the internet. The report should have a formal structure with abstract, introduction and sub-headings in the main body as well as a summary or conclusion and a full reference list. All diagrams should have captions, be legible and sources must be acknowledged. Topics may be selected from the following list or an alternate topic may be submitted to the relevant lecturer for approval. Students must work on the assignment individually and reports are due on or before May 16. Assignment topics will be provided early in the semester.
Criteria & Marking:

emphasized weighting will be given to the following atributes:

- clarity of presentation,

- completeness and relevance of material,

- critical analysis of the material.

Submission: submission box on level 1, itee building (#78)

final exam

Type: Exam - during Exam Period (Central)
Learning Objectives Assessed: 1, 2, 3
Due Date:
Examination Period
Weight: 55%
Perusal: 10 minutes
Duration: 120 minutes
Task Description: final examination, closed book.
Criteria & Marking: You are expected to be familiar with all aspects of the course activities including all modules and laboratories. Subject matter taught/discussed directly in the classroom as well as knowledge gained through other activities such as tasks (activities) assigned in the course guides, hands-on project work and reading materials provided (or directed to) by the lectures will also be considered as examinable content.

6. Policies & Guidelines

This section contains the details of and links to the most relevant policies and course guidelines. For further details on University Policies please visit myAdvisor and the University Handbook of Policies and Procedures.

6.1 Assessment Related Policies and Guidelines

University Policies & Guidelines

An overview of the University’s assessment-related policies can be found on myAdvisor (http://www.uq.edu.au/myadvisor/index.html?page=2910).

Academic Integrity
It is the University's task to encourage ethical scholarship and to inform students and staff about the institutional standards of academic behaviour expected of them in learning, teaching and research. Students have a responsibility to maintain the highest standards of academic integrity in their work. Students must not cheat in examinations or other forms of assessment and must ensure they do not plagiarise.

Plagiarism
The University has adopted the following definition of plagiarism:

Plagiarism is the act of misrepresenting as one's own original work the ideas, interpretations, words or creative works of another. These include published and unpublished documents, designs, music, sounds, images, photographs, computer codes and ideas gained through working in a group. These ideas, interpretations, words or works may be found in print and/or electronic media.

Students are encouraged to read the UQ Academic Integrity and Plagiarism policy (http://www.uq.edu.au/hupp/index.html?page=25128) which makes a comprehensive statement about the University's approach to plagiarism, including the approved use of plagiarism detection software, the consequences of plagiarism and the principles associated with preventing plagiarism.

Feedback on Assessment
Feedback is essential to effective learning and students can expect to receive appropriate and timely feedback on all assessment. For a detailed explanation of the feedback you are entitled to, you should consult the policy on Student Access to Feedback on Assessment. (http://www.uq.edu.au/hupp/index.html?page=25114&pid=25075)

As a student you have a responsibility to incorporate feedback into your learning; make use of the assessment criteria that you are given; be aware of the rules, policies and other documents related to assessment; and provide teachers with feedback on their assessment practices.

There are certain steps you can take if you feel your result does not reflect your performance. Please refer to the myAdvisor web site. (http://www.uq.edu.au/myadvisor/index.html?page=2953&pid=2910)

School of Information Technology and Electrical Engineering Assessment Guidelines

Misconduct

Further to the statement on academic integrity and plagiarism above, students are required to read and understand the ITEE policy on Student Misconduct (http://www.itee.uq.edu.au/about_ITEE/policies/student-misconduct.html).

Late Arrival or Non-attendance at Examinations

The policy and procedure for late arrival or non-attendance at centrally controlled examinations is set out in the University's Examinations policy (HUPP 3.30.5), sections 8 and 10.2.

The way in which late arrival at a School-controlled examination is dealt with will be at the discretion of the course coordinator, who may be guided by the policy for centrally controlled exams.

In the case that a student requests a special exam for a School-controlled exam, the request will be considered and, if allowed, the timing shall be determined by the course coordinator, in consultation with the School's Chief Examiner where necessary, and in accordance with HUPP 3.30.5. Unless otherwise indicated in the Course Profile, applications must be made in writing to the Head of School no later than one week after the exam. Late applications will not be accepted.

Examination Feedback

In addition to the advice above, students wishing to view examination answer scripts and/or question papers should consult with the School office (Room 217, General Purpose South Building [78], St Lucia; Room 218, Building 1, Ipswich) regarding arrangements. The ITEE policy on exam script viewing is available at http://study.itee.uq.edu.au/current_students/exam_script_viewing.html.

Supplementary Assessment

If you fail this course you may be eligible for supplementary assessment - see the general award rules and/or your program rules for details. You should note that even though you may be eligible for supplementary assessment under these rules, in some circumstances there may be no practical assessment that can be offered to allow you to meet the minimum passing requirements. These circumstances may include failure based on:

group or team based assessment;
attendance or class participation requirements;
laboratory-based assessment, where laboratories can't practically be made available after classes have finished;
project or thesis-based assessment, where a significant period of time would be required to undertake supplementary assessment;
progressive assessment, where subsequent assessment items build on earlier assessment items; or
multiple assessment items, where it is impractical to offer multiple supplementary assessment items.

If the course coordinator determines that there is no practical supplementary assessment that can be offered to allow you to improve your grade, then you will not be offered supplementary assessment and your grade will remain unchanged.

6.2 Other Policies and Guidelines

University Policies and Guidelines

Placement Courses
Students on a placement course – also known as a work placement, internship, industry study, industry experience, clinical practice, clinical placement, practical work, practicum, fieldwork, teaching practice – should refer to the University policy, Placement Courses (http://www.uq.edu.au/hupp/index.html?page=25120&pid=25075) for detailed information.

Working with Children
Students whose studies include a professional/work placement, internship, clinical practice, teaching practice or other similar activity which involves them in regular contact with children should refer to the University policy, Working with Children Check - "blue card" (http://www.uq.edu.au/hupp/index.html?page=25004&pid=24963) to find out how to apply for a ‘blue card’.

Students with a Disability
Any student with a disability who may require alternative academic arrangements, including assessment, in the course/program is encouraged to seek advice at the commencement of the semester from a Disability Adviser at Student Support Services. Refer to the University policy, Students with a Disability (Disability Action Plan) (http://www.uq.edu.au/hupp/index.html?page=25122&pid=25075) and to the policy on Special Arrangements for Examinations for Students with a Disability (http://www.uq.edu.au/hupp/index.html?page=25111&pid=25075

Where an adjustment is made to an accredited program, it is the responsibility of the relevant Faculty to liaise with professional and registration bodies regarding the acceptability of the change/s.

Occupational Health and Safety
Undergraduate Students (http://www.uq.edu.au/hupp/index.html?page=25055&pid=25015) and Postgraduate Students (http://www.uq.edu.au/hupp/index.html?page=25057&pid=25015) should be familiar with the University policies on occupational health and safety in the laboratory.

Other School of Information Technology and Electrical Engineering Guidelines

Ethical Clearance

If your course involves assignment or project work involving human subjects or human-related materials, you must investigate the need for ethical clearance and obtain it when required. Information on ethical clearance can be found at http://www.uq.edu.au/research/orps/index.html?page=5064&pid=5256.

Learning Summary

Below is a table showing the relationship between the learning objectives for this course and the broader graduate attributes developed, the learning activities used to develop each objective and the assessment task used to assess each objective.

Learning Objectives

After successfully completing this course you should be able to:

1  understand the physical basis of image formation, including acquisition methods and important features of images
2  understand the fundamentals of at least two Medical Imaging systems
3  be familiar with introductory digital image processing and analysis

Assessment & Learning Activities

	Learning Objectives
	1	2	3
Learning Activities
tutorials Wednesday 9-10 (Tutorial Series)
main lectures Friday 10-12 (Lecture Series)
image computation practicals (Practical)
hospital/laboratory (Demonstration)
Assessment Tasks
mid-semester exam
image processing assignment
review of technology assignment
final exam

Graduate Attributes

Successfully completing this course will contribute to the recognition of your attainment of the following UQ (Postgrad Coursework) graduate attributes:

	Learning Objectives
	1	2	3
Graduate Attributes
*A IN-DEPTH KNOWLEDGE OF THE FIELD OF STUDY*
A2. A broad understanding of the field of study, including how other disciplines relate to the field of study.
A3. A comprehensive and in-depth knowledge in the field of study.
A5. An international perspective on the field of study.
A7. An appreciation of the link between theory and practice.
*B EFFECTIVE COMMUNICATION*
B1. The ability to collect, analyse and organise information and ideas and to convey those ideas clearly and fluently, in both written and spoken forms.
B2. The ability to interact effectively with others in order to work towards a common outcome.
B3. The ability to select and use the appropriate level, style and means of communication.
B4. The ability to engage effectively and appropriately with information and communication technologies.
B5. The ability to practise as part of an interdisciplinary team.
*C INDEPENDENCE AND CREATIVITY*
C2. The ability to work and learn independently and effectively.
C3. The ability to generate ideas and adapt innovatively to changing environments.
C5. The ability to formulate and investigate problems, create solutions, innovate and improve current practices.
C6. The abilities and skills that provide a foundation for future leadership roles.
*D CRITICAL JUDGEMENT*
D2. The ability to apply critical reasoning to issues through independent thought and informed judgement.
D4. The ability to process material and to critically analyse and integrate information from a wide range of sources.
D5. The ability to evaluate opinions, make decisions and to reflect critically on the justifications for decisions using an evidence-based approach.
*E ETHICAL AND SOCIAL UNDERSTANDING*
E1. An understanding of social and civic responsibility.
E3. An appreciation of the philosophical and social contexts of a discipline.
E4. A knowledge and respect of ethics and ethical standards in relation to a major area of study.
E5. A knowledge of other cultures and times and an appreciation of cultural diversity.
E7. The ability to work effectively and sensitively across all areas of society.
E8. An understanding of and respect for the roles and expertise of associated disciplines.

feedback

ELEC7608 - Sem 1 2008 - St Lucia - Internal

1. General Course Information

1.1 Course Details

1.2 Course Introduction

1.3 Course Staff

1.4 Timetable

2. Aims, Objectives & Graduate Attributes

2.1 Course Aims

2.2 Learning Objectives

2.3. Graduate Attributes

3. Learning Resources

3.1 Required Resources

3.3 University Learning Resources

3.4 School of Information Technology and Electrical Engineering Learning Resources

4. Teaching & Learning Activities

4.1 Learning Activities

4.2 Other Teaching and Learning Activities Information